Hepa Bag – Pkg of 3

Five layer, 7 gallon HEPA style replacement bag for current VacuMaid models SR52, SR52H, SR760, SR800, all VacuMaid Garage Vacs and Valet ATQ300.  This paper bag filter is an alternate bag for the AstroVac models: SR36C, SR36, SR50, SR52.  Replacement for the following models: H-1P, P70, SR36, SR38, P80, H2, P73, P75, MK-IP, MK-XXIIIBP.  Replace at no more than ½ full or when lack of suction is noticed.  Can also be used in DC500 and DC800 dirt canister.  When flat, bag measures 27" x 12".

Garage Vac PRO


This wall-mounted vacuum cleaner is extremely powerful and has a variety of cleaning applications, both residential & commercial. It can be placed in garages, auto detail shops, workshops, craft rooms, utility rooms, basements, clean rooms and can be used as a personnel vac.

Electrostatic Lint Screen 12″

The electrostatic screen is an optional item for the filter screen area. The ES1200 is a 12" blue filter with center hole.   It allows free, unrestricted airflow that you have come to expect from your VacuMaid system.  For VacuMaid units P350P, S2600, S1600 that have separate dirt canister DC-1200 or DCMCC. 12" Diamater x .5" to .75" Thickness

Wall Wand Holder

The Wall Wand Holder is for storing your wands on the wall instead of on the floor. It is very simple to use. Just pull rubber piece out so that it is flat and then press wand into it. The holder will automatically adjust itself to the diameter of the wand it is holding. It is strong enough to hold the wand with a powerbrush attached. Mounts using only one stud and two screws.

Tubing Wire Clip – White – 5544W

Wire Clip for 2" Central Vacuum Piping System White

Plastic Bags for 12″ Dirt Can – Pkg of 4

Replacement can liner for 12” dirt canisters that have Air Channel. This bag is a replacement for 12” dirt canisters with Air Channel and makes emptying the canister much simpler.  It works in the 12" DC1200 dirt canister of the following brands VacuMaid, AstroVac, Valet and more. Fits the DC1200 dirt can in the following units: P225, S1600, S1660, S2600, and S2700. Fits the bottom can for single piece systems including: ATQ160, ATQ180, P110, P112, P125P, S1200, S2000, SR12, SR14, SR40V, SR44, and SR46. Use for easy maintenance when disposing of debris.  Simply remove bottom can, take out can liner and throw away.  No puffs of dust as you dump the can.  Clean and simple. When flat, bag measures 22" x 12". This bag can only be used if dirt canister has bag clip and air channel.

Floor Brush

This hard floor brush has a soft natural fill that will support the brush over any hard floor surface, allowing it to glide over uneven surfaces without the fear of damaging the finish of polished stone or hardwood flooring.

Floor Tool with MicroFiber Mop Head – Green

Soft fiber floor tool for cleaning hard surfaces. Removable fringe can be cleaned in the washing machine.

Floor Brush with Wheels

This floor brush is equipped with wheels to allow you to more easily move from carpet to hard floor surfaces.

Notched Floor and Rug Tool

This scalloped shoe carpet tool works well on low pile carpet and bare floors, wood and tile. The scalloped edge ensures that the tool won't seal to the floor, even with the most powerful central vacuum.

Hand Held Air Turbine Brush

The Rug Rat's slim design accommodates ease of use at the end of the wand or for closer control in your hand. The high speed brush is ideal for cleaning surfaces like stairs, inside your car, and upholstery.  This high speed brush cleans and grooms carpeting, stairs, upholstery and vehicles interiors. Use is at the end of the wand to eliminate bending over or hold it in your hand for more control.

Hand Held Air Turbine Brush

This unique tool is great for stairs, vehicles, and upholstery. The open face design allows for a more complete clean in corners and on the risers of stairs.

Air Turbine Brush with Clutch System

The PB472is energy-efficient and offers optimal cleaning power even with low-power vacuum cleaners. Thanks to the unique noise-optimized design, this tool offers quieter turbo brush cleaning. It can be adapted to the various performance levels by quickly adjusting the air-flow valve. Whether you're cleaning carpets or hardwood the 360° swivel neck, paired with the 4 soft roller wheels, makes it easy to maneuver around furniture and appliances. The PB472 air-driven turbo brush powerhead fits all friction-fit wands that are the US standard 1.25in (32mm) outer diameter. We also offer the TK286 that fits the European standard-sized friction-fit wands of 1.38in. (35mm) outer diameter. The neck design of the TK286 swivels 360° and has a full tilt that allows for easy maneuvering under and around furniture. The auto height adjustment feature helps maintain the perfect height on all carpet types while the brush roller gently floats up and down when needed to provide optimal contact. This feature prevents the turbo brush floor attachment from clinging to your carpets while cleaning. The brush roller is equipped with double V-shaped nylon bristles and the cleaning tool can be used to free any tangled hairs or threads from the brush roller.
  • 4 Soft Roller Wheels
  • Adjustable Airflow Valve
  • Air Turbine Technology
  • Cleaning Flap for Easy Turbine Cleaning
  • Full-Tilt and 360° Swivel Neck Design

Air Turbine Brush

The Turbocat is an air turbine-driven power brush that has an agitator that shakes the carpet to loosen dirt. This power brush is excellent on both high and low pile carpeting.
Easy to Install. Includes hose and tools

VacuMaid Garage Vac

This wall-mounted vacuum cleaner is extremely powerful and has a variety of cleaning applications, both residential & commercial: Garages, Vehicles, Auto Detail Shop, Workshops, Utility rooms, Basements.