CR-1526C is 208 Voltage, CR-1526A is 230 Voltage, CR-1526B is 460 Voltage
60 Hz. 50 Hz.
Induction Motor: ……………………………………… 3Ph, 10HP, 3450 RPM 3 Ph, 8HP, 2850 RPM
Voltage: ………………………………………………….. 208, 230, 460 190-220/380-415 (customer must specify voltage)
Amperage (Approx.): ……………………………………………………….. 30, 26, 15 17.4-17.2/8.7-8.6
*Electrical Service to Unit: …………………………………. No. 8, No. 10, No. 14 No. 14
Pump: …………………………………………………… Regenerative
Airflow @ 3″ Opening (Approx.): ……………………………………….. 405 C.F.M. 9.5 CMM
Sealed Vacuum (Approx.): ………………………………………………….. 125″ H2O 292 cm H2O
RECOMMENDED RELIEF VALVE SETTING: ……………………. **90″ H2O **188 cm H2O
Dimensions (Approx.):
Power Unit:
Length: …………………………………………………. 24-1/8″
Width: ………………………………………………….. 18-5/8″
Height: ……………………………………………… 21-13/16″
Shipping Weight (Approx.): …………………………………………………… 300 lbs.
Inlet Connection: ……………………………………………………….. 3-1/2″ I.D.
Outlet Connection: ……………………………………………………….. 3-1/2″ I.D.
Primary Filter – DC-2600 (For use with fine dust ONLY.)
Filtration: …………………… Five stage cyclonic with gate valve.
Inlet and Outlet Connections: …………………………………………… 3-1/2″ O.D.
Diameter: …………………………………………………………………. 25″
Height: …………………………………………………………………. 87″
Radius (including support legs): …………………………………………………… 17″
Capacity (Approx.): ……………………………………………………………. 15 Gal.
Shipping Weight (Approx.): …………………………………………………… 265 lbs.
Secondary Filter – DC-1603
Filtration: ………………………. High efficiency reusable bag filter.
Inlet and Outlet Connections: …………………………………………… 3-1/2″ O.D.
Diameter: …………………………………………………………………. 19″
Height: …………………………………………………………………. 29″
Filter Area (Approx.): ……………………………………………………….. 7.5 Sq. Ft.
Shipping Weight (Approx.): …………………………………………………….. 60 lbs.
Replacement Filter: ………………………………………………………….. FB-1603
*Electrical Service to unit should be installed by a licensed electrician.
*Preferred Setting
NOTE: All commercial and industrial units should use 2-conducters, 18 gauge minimum for low voltage wiring (2VM-18001).
**NOTE: Relief Valve should be set at a preferred setting of 90″ H2O at 60 Hz. and 188 cm H2O at 50 Hz., when possible, use the preferred/recommended settings above.
NOTE: You should contact the factory for applications before ordering.
NOTE: First five feet of exhaust MUST be metal 3-½” O.D. tubing (SF-3075).
Use with fine dust ONLY, not for use with general cleaning.
[Download not found]