MODEL CR-1451 60 Hz. 50 Hz.
Induction Motor: ………………………………………….. 1Ph, 5 H.P., 3450 RPM 1Ph, 3.5HP, 3450 RPM
Voltage: …………………………………………………………….. 230 Volts 200-220 Volts
Amperage: ……………………………………………………………………. 21.0 17.0
Length: ……………………………………………………………….. 19-9/16
*Electrical Service to Unit: ………………………………………………………. No. 10
RECOMMENDED RELIEF VALVE SETTINGS: ……………………… **77″ H2O **160.8 cm H2O
Primary Filter – DC-1240AC w/Air Channel
Filtration: …. Cyclonic funnel primary,standpipe secondary with
… safety screen and convenient lift off inspection lid.
Inlet and Outlet Connections: …………………………………………………………. 2″
Diameter: ……………………………………………………………….. 14-1/8″
Height: ……………………………………………………………….. 37-1/4″
Capacity (Approx.): ……………………………………………………………… 27 Qts.
Shipping Weight (Approx.): …………………………………………………. 23.0 lbs.
Replacement Bag …………………………………………………………………. PB-4M
Secondary Filter – DC-500
Filtration: ………………………………………………. Reusable filter bag.
Inlet and Outlet Connections: …………………………………………………………. 2″
Diameter: ……………………………………………………………….. 13-5/8″
Height: ……………………………………………………………….. 25-3/4″
Capacity (Approx.): ……………………………………………………………… 27 Qts.
Shipping Weight (Approx.): …………………………………………………. 10.0 lbs.
Replacement Bag: …………………………………………………………………. HFB-4
* Electrical Service to unit should be installed by a licensed electrician.
**Preferred Settings
CP-1400 A, B, or C
Control Box with 24 Volt
Remote System
NOTE: All commercial and industrial units should use
2-conducters, 18 gauge minimum for low voltage wiring
(2VM-18001).
NOTE: Relief Valve should be set at a preferred setting of 80″
H2O at 60 Hz. and 162 cm H2O at 50 Hz, when possible use
the preferred/recommended settings above.
NOTE: The first 5 feet of metal tubing MUST be used on
exhaust (SF-207).
[Download not found] Dealer Pricing (2 downloads)
