FREE SHIPPING FOR ALL ORDERS OF $75 -- Continental US Only
  • CONTACT US
  • FAQs
Lindsay Manufacturing
Select category
  • Select category
  • Cans and Gaskets
  • Commercial
    • Commercial Bags
      • commercial_filter
    • Commercial Installation
      • 3_inch_vacuum_fittings
      • aluminum_inlets
      • installation_metal_inlets
      • Steel Fittings
    • Commercial Tools
      • commercial_hoses
    • Commercial Units
    • Dirt Canisters
    • medivac
  • Control Modules
  • Electric Brushes
    • Brush Replacement Parts
    • Electric Brush
  • Filters & Bags
  • Fittings
  • Floor Brushes
    • Floor Brush
    • Floor Brush Parts
  • Garage Vac
    • Garage Vac Accessories
    • Garage Vac Bags
    • Garage Vac Hoses
    • Garage Vac Replacement Items
    • Garage Vac Replacement Motors
    • Garage Vac Vacuums
  • Hide A Hose
  • Hoses
    • Electric Hoses
    • Hose Cuffs
    • Hose Handle
    • Hose Repair Kits
    • Hose Sock
    • Standard Hoses
    • Vacuum Hoses
  • Inlets
    • Electric Valves
      • Electric Inlet Misc
      • Electric Inlets
    • Metal Valves
      • Metal Inlets
      • Metal Misc
    • Plastic PinJack Inlet Valves
      • PinJack Inlet Misc
      • Plastic PinJack Inlets
    • Square Inlet Valves
      • Square Inlet Misc
      • Square Inlets
    • Utility Valves
  • Installation Accessories
    • Back Up Plates
    • Rough In Kits
  • Microfiber
  • Replacement Motors
    • Motor Brushes
    • Motor Gaskets
    • Motors
  • Storage
  • Sweep Inlets
  • Tool Kits
    • Electric Tool Kits
      • Direct Connect
      • Pig Tail
    • Garage Kits
    • Straight Suction Kits
    • Turbo Kits
  • Tools & Accessories
    • sidewinder
  • Tubing
  • Utility Vac
  • Vacuum Systems
    • Cyclonic
    • Cyclonic – Split System
    • Dirt Canisters
    • Disposable Bag
    • Filtered Inverted Bag
  • Valet System One
  • Wet Pickup / Interceptor
    • Accessories
    • Buckets
    • Replacement Parts
    • Wet Pickup Kits
SUPPORT 8am-5pmCST
Mon-Thur

1-800-546-3729

0 items $0.00
Menu
Lindsay Manufacturing
0 items $0.00
Browse Categories
  • Vacuum Systems
    cyclonic_sa
    • Cyclonic
      • P112
      • S2400
      • S1660
      • S2600
      • S2720 - 8.4" 240V
      • S3600 - 240V
    SR66_sq
    • Disposable Bag
      • SR36
      • SR38
      • SR52
      • SR66
      • SR800
      • SR820 - 8.4" 240V
    inverted_sq
    • Inverted Bag FIlter
      • SR14
      • SR46
      • SR60
      • SR62
      • SR64
    cyclonic_sa
    • Commercial 3000 hour
      • CS66
      • CS46
      • CS1660
    VacuMaid
    AstroVac
  • Tool Kits
  • Hide A Hose
  • Cans and Gaskets
  • Commercial
  • Electric Brushes
  • Filters & Bags
  • Fittings
  • Floor Brushes
  • Garage Vac
  • Hoses
  • Inlets
  • Installation Accessories
  • Accessories
  • Electric Tool Kits
  • Garage Kits
  • Microfiber
  • Replacement Motors
  • Storage
  • Sweep Inlets
  • System One
  • Tools & Accessories
  • Tubing
  • Valet System One
  • Wet Pickup / Interceptor
  • Standard Hoses
  • Shop
    • Vacuum Systems
      • Cyclonic
      • Cyclonic – Split System
      • Disposable Bag
      • Filtered Inverted Bag
      • Garage Vac
      • Commercial
    • Tools & Accessories
      • Tool Kits
        • Electric Tool Kits
      • Electric Brushes
        • Brush Replacement Parts
        • Electric Brush
      • Wet Pickup / Interceptor
    • Valet System One Intercoms
    • Hoses
      • Hide A Hose
      • Standard Hoses
      • Electric Hoses
        • Direct Connect
        • Pig Tail
      • Hose Handle
      • Hose Repair Kits
    • Installation and Repair
      • Inlets
        • Electric Valves
        • Electric Inlet Misc
        • Electric Inlets
        • Metal Valves
        • Metal Inlets
        • Plastic PinJack Inlet Valves
        • PinJack Inlet Misc
        • Plastic PinJack Inlets
      • Steel Fittings
      • Sweep Inlets
      • Back Up Plates
      • Utility Valves
      • Rough In Kits
      • Fittings
      • Tubing
      • Replacement Motors
        • Motor Brushes
        • Motor Gaskets
        • Motors
      • Filters & Bags
      • Control Modules
  • My Account
    • Edit Account
    • View Order
    • Edit Address
    • Lost Password
  • Checkout
  • Cart
Login / Register
Wishlist
0 Compare
EB240 in EK12
Electravalve hose end
ElectraValve
ElectraValve
EB240 in EK12
Click to enlarge
EB240 in EK12
Electravalve hose end
ElectraValve
ElectraValve
EB240 in EK12
Home Installation Accessories Fire Stop Kit For 2″ PVC Tubing Only
Vacuum Inlet Fitting
Vacuum Inlet Fitting $3.20
Back to products
Wire Hose 2″ ID For Connection To 2″ Tubing $5.40

Fire Stop Kit For 2″ PVC Tubing Only

$26.70

Some local building jurisdictions are requiring Fire Stop Collars where the CVS pipe enters the garage area. This is a low cost, UL approved effective solution.

Add to wishlist
SKU: VPK2 Category: Installation Accessories
Share:
  • Description
  • Additional information
  • Reviews (0)
  • Shipping & Delivery
Description

The VPK-2 is specifically designed to fit nominal 2″ diameter Type II high-impact PVC vacuum tubing. Do not use the VPK- 2 on metallic vacuum tubing. A minimum 1 /8″ to maximum 3/16″ annular space is required between the pipe and the periphery of the opening to accommodate wrap strip.
This kit contains the following items:

  • 7″ long x 1-1 /2″ wide. x 1 /8″ thick SpecSeal® RED2 Wrap Strip
  • 9″ long x 1-1/2″ wide 3 mil aluminum foil tape
  • 0.6 in3 SpecSeal® Putty

Installation Steps:

1. Install wrap strip around plastic pipe and butt seams. Wrap strip may be temporarily held in place with tape.  (See Fig. 1)

2. Encircled wrap strip with aluminum foil tape provided. (See Fig. 2)

3. Slide wrap strip along pipe into annular space until exposed edge projects 1/4″ from wall or ceiling surface. (See Fig. 3)

4. Apply a minimum 1/4 in. diameter “rope” of putty at the interface of the wrap strip and the wall or ceiling interface. (See Fig. 4)

 

Important Notice: All statements, technical information, and recommendations contained herein are based upon testing believed to be reliable, but the accuracy and completeness thereof is not guaranteed.
WARRANTY: Specified Technologies Inc. manufactures its goods in a manner to be free of defects. Should any defect occur in its goods (within one year), Specified Technologies Inc., upon prompt notification, will at its op­tion, exchange or repair the goods or refund the purchase price.
Limitations and Exclusions: THIS WARRANTY IS IN LIEU OF ALL OTHER REPRESENTATIONS EXPRESSED OR IMPLIED (INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR USE) AND UN­DER NO CIRCUMSTANCES SHALL SPECIFIED TECHNOLOGIES INC. BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL PROPERTY DAMAGE OR LOSSES. PRIOR TO USE, THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED USE, AND THE USER ASSUMES ALL RISKS AND LIABILITY FOR SUBSEQUENT USE. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer.
Additional information
Weight 0.3 lbs
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Fire Stop Kit For 2″ PVC Tubing Only” Cancel reply

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wood-gallery-placeholder-4

Shipping

Products ordered from this website are only shipped to the United States. Our warehouse is open Mon-Thurs. If the order is placed Monday – Wednesday, most orders will be shipped the next day the order is placed. If not, shipment is within two or three business days.  Free Shipping is only available for the continental US only.

Returns & Refund Policy

You must contact Customer Service within 30 days of receipt of merchandise. Contact us by calling 1-800-546-3729 to receive a “Return Authorization Number” which will ensure a quick and efficient processing of your refund or exchange. Product must be returned in original condition and in the original boxes. Please include the Return Authorization number on the front of the returned package. We do not reimburse for the cost of shipping to return merchandise unless there was a shipping error on our part.  Customers will receive a refund on the credit card or Paypal account used to make the purchase. Please allow 10 business days to complete the refund.

How To Contact Us

If you have any questions or comments please call at 1-800-546-3729 Mon – Thur between 8am – 5pm CST or Friday 8am-12pm CST or email us anytime at lindsay@fullnet.net.

Related products

Compare

Wire Hose 2″ ID For Connection To 2″ Tubing

$5.40
Good option for installing a vacpan or vacusweep.  Also used to connect ICC211 or ICC210. Use a clamp HC28 to
Add to wishlist
Add to cart
Quick view
Compare

Wire Nut 18-22

$0.30
Wire Nut 18-22
Add to wishlist
Add to cart
Quick view
Vacuum Test Cap
Compare

Vacuum Test Cap 1-5/8″ – Red

$0.40
Install this test cap and it will seal the drop at the mount plate. You no longer need to install the valve to test the system.
Add to wishlist
Add to cart
Quick view
silencer
Compare

Round Muffler – 12″ Long with 2″ Connections – White

$14.25
This muffler is a noise reducer that can be installed on the exhaust tube of the central vacuum power unit.
Add to wishlist
Add to cart
Quick view
PVC cutter
Compare

Tube Cutter – Plastic

$48.50
2" PVC tubing cutter.
Add to wishlist
Add to cart
Quick view
Compare

Escutcheon Nickel Pipe Collar

$1.60
Escutcheon Nickel Pipe Collar
Add to wishlist
Add to cart
Quick view
pvc cement
Compare

Plastic Cement – 1/2 Pint – Blue

$29.00
Plastic Cement – 1/2 Pint – Blue
Add to wishlist
Add to cart
Quick view
Compare

Package of 10 Blades for TC461

$17.50
Package of 10 Blades for TC461 Tube Cutter
Add to wishlist
Add to cart
Quick view
Useful links
  • Privacy Policy
  • Returns
  • Terms & Conditions
  • Contact Us
2023 CREATED BY LINDSAY MANUFACTURING INC.
payments
  • Home
  • Portfolio
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
Facebook Twitter Instagram YouTube Pinterest linkedin