Showing 1–24 of 732 results

Hepa Bag – Pkg of 3

$30.00
Five layer, 7 gallon HEPA style replacement bag for current VacuMaid models SR52, SR52H, SR760, SR800, all VacuMaid Garage Vacs and Valet ATQ300.  This paper bag filter is an alternate bag for the AstroVac models: SR36C, SR36, SR50, SR52.  Replacement for the following models: H-1P, P70, SR36, SR38, P80, H2, P73, P75, MK-IP, MK-XXIIIBP.  Replace at no more than ½ full or when lack of suction is noticed.  Can also be used in DC500 and DC800 dirt canister.  When flat, bag measures 27" x 12".

Garage Vac PRO

$359.00$439.00

This wall-mounted vacuum cleaner is extremely powerful and has a variety of cleaning applications, both residential & commercial. It can be placed in garages, auto detail shops, workshops, craft rooms, utility rooms, basements, clean rooms and can be used as a personnel vac.

Electrostatic Lint Screen 12″

$10.00
The electrostatic screen is an optional item for the filter screen area. The ES1200 is a 12" blue filter with center hole.   It allows free, unrestricted airflow that you have come to expect from your VacuMaid system.  For VacuMaid units P350P, S2600, S1600 that have separate dirt canister DC-1200 or DCMCC. 12" Diamater x .5" to .75" Thickness

Tubing Wire Clip – White – 5544W

$0.28
Wire Clip for 2" Central Vacuum Piping System White

Wall Wand Holder

$3.95
The Wall Wand Holder is for storing your wands on the wall instead of on the floor. It is very simple to use. Just pull rubber piece out so that it is flat and then press wand into it. The holder will automatically adjust itself to the diameter of the wand it is holding. It is strong enough to hold the wand with a powerbrush attached. Mounts using only one stud and two screws.

Disposable Bag Filter

$20.00$255.00
Three layer, non woven fabric bag with microliner replacement bag for Vacumaid and AstroVac models H1P, P70, SR36, SR36C, SR38, P80, H2, P73, P75, MK1P, MKXXIIIBP, HV101 Hairvac.  Fits Valet AT100 and Valet AT120.  Also fits DC500 and DC800 Dirt Canisters.  Dust retention of 98.4% efficiency*at DIN44956.  If additional filtration is required, use HPB2H Hepa style bag is a great option. When flat, bag measures 10” x 25 1/2”. Can be purchased in 3 pack, 30 pack and 60 pack.  Replace at no more than ½ full or when lack of suction is noticed.

Plastic Bags for 12″ Dirt Can – Pkg of 4

$7.95
Replacement can liner for 12” dirt canisters that have Air Channel. This bag is a replacement for 12” dirt canisters with Air Channel and makes emptying the canister much simpler.  It works in the 12" DC1200 dirt canister of the following brands VacuMaid®, AstroVac®, Valet® and more. Fits the DC1200 dirt can in the following units: P225, S1600, S1660, S2600, and S2700. Fits the bottom can for single piece systems including: ATQ160, ATQ180, P110, P112, P125P, S1200, S2000, SR12, SR14, SR40V, SR44, and SR46. Use for easy maintenance when disposing of debris.  Simply remove bottom can, take out can liner and throw away.  No puffs of dust as you dump the can.  Clean and simple. When flat, bag measures 22" x 12". This bag can only be used if dirt canister has bag clip and air channel.

Industrial Upholstery Tool – Orange

$10.00
This tool is great for car interiors, seats and mats. May use for wet or dry pickup. It's a great addition to any garage vacuum kit. *For use with a 1.25" domestic hose and the hose in the garage vac, you will need an adapter (HC-111BL) hose end which connects the tool to the hose.*  

Electrostatic Lint Screen (S1200/S2000) (Optional for P125P/P110)

$10.00
The ES-934 electrostatic lint screen is an optional replacement screen for single canister units such as the S-1200 and S-2000. It can also be used on models P-125 and P-110.  Great for homes with pets that shed as hair and lint accumulates in this area of the unit. It adds protection and traps dirt in lint screen so it doesn’t build up on top screen. Makes cleaning upper chamber of unit much easier.  The pull tab makes it easy to remove. 10" Diameter x .5" to .75" thickness

Vacuum Hose Connector – One End Threaded

$2.92
This black hose cuff fits 1.25″ (32mm) ends. It is used to thread on to the end of a hose

Plastic Bags for 14″ Dirt Can – Pkg of 4

$9.95
This bag is a replacement for 14" dirt canisters with air channel and makes emptying the dirt canister even easier. It works in the DC1240 dirt canister of the P350P, S3600, P400 and the single can units including:S2400, SR54, and SR64.  When flat, bag measures 24" x 15".

Garage Vac

$319.00$399.00
This wall-mounted vacuum cleaner is extremely powerful and has a variety of cleaning applications, both residential & commercial. It can be placed in garages, auto detail shops, workshops, craft rooms, utility rooms, basements, clean rooms and can be used as a personnel vac.

Hose to Inlet Connector or Hose to HC111BL Cuff Connector

$2.50
The HV-109 cuff is a hose to inlet connector made of vinyl plastic. It comes standard on the H-130 and HS-130W hoses. It is suitable to use with most 1-1/4 inch standard central vacuum valves and hoses.

Dusting Brush – Premium

$9.00
natural bristles for gentle cleaning. It can be used with an extension wand for dusting out of reach high hanging pictures

Hide A Hose Elbow, 90 2″

$12.40
Large radius 90° elbow for Hide A Hose retractable systems

Flexible Crevice Tool

$8.24
This crevice tool features a 24" in length long flexible body which allows the tool to bend to reach under awkward spaces such as underneath and between seats of a vehicle or refrigerator. The end is notched to provide continuous air flow and angled to make it easier to pick up debris

Combination Floor Brush

$20.32
This tool works well on bare floors and rugs. It is equipped with extra brushes underneath to make it more gentle on wood floors. The convenient foot lever allows you to easily enable the extra brushes.

1-1/4″ Plastic ElectraValve II – 775850

$8.50$8.90
The unique design of this valve eliminates the need for extra plugs and extension cords to drive a electric brush.