Hepa Bag – Pkg of 3
Five layer, 7 gallon HEPA style replacement bag for current VacuMaid models SR52, SR52H, SR760, SR800, all VacuMaid Garage Vacs and Valet ATQ300. This paper bag filter is an alternate bag for the AstroVac models: SR36C, SR36, SR50, SR52. Replacement for the following models: H-1P, P70, SR36, SR38, P80, H2, P73, P75, MK-IP, MK-XXIIIBP. Replace at no more than ½ full or when lack of suction is noticed. Can also be used in DC500 and DC800 dirt canister. When flat, bag measures 27" x 12".
Garage Vac PRO
Electrostatic Lint Screen 12″
The electrostatic screen is an optional item for the filter screen area. The ES1200 is a 12" blue filter with center hole. It allows free, unrestricted airflow that you have come to expect from your VacuMaid system. For VacuMaid units P350P, S2600, S1600 that have separate dirt canister DC-1200 or DCMCC.
12" Diamater x .5" to .75" Thickness
Wall Wand Holder
The Wall Wand Holder is for storing your wands on the wall instead of on the floor. It is very simple to use. Just pull rubber piece out so that it is flat and then press wand into it. The holder will automatically adjust itself to the diameter of the wand it is holding. It is strong enough to hold the wand with a powerbrush attached. Mounts using only one stud and two screws.
Plastic Bags for 12″ Dirt Can – Pkg of 4
Replacement can liner for 12” dirt canisters that have Air Channel. This bag is a replacement for 12” dirt canisters with Air Channel and makes emptying the canister much simpler. It works in the 12" DC1200 dirt canister of the following brands VacuMaid®, AstroVac®, Valet® and more. Fits the DC1200 dirt can in the following units: P225, S1600, S1660, S2600, and S2700. Fits the bottom can for single piece systems including: ATQ160, ATQ180, P110,
P112, P125P, S1200, S2000, SR12, SR14, SR40V, SR44, and SR46.
Use for easy maintenance when disposing of debris. Simply remove bottom can, take out can liner and throw away. No puffs of dust as you dump the can. Clean and simple.
When flat, bag measures 22" x 12". This bag can only be used if dirt canister has bag clip and air channel.
Disposable Bag Filter
Three layer, non woven fabric bag with microliner replacement bag for Vacumaid and AstroVac models H1P, P70, SR36, SR36C, SR38, P80, H2, P73, P75, MK1P, MKXXIIIBP, HV101 Hairvac. Fits Valet AT100 and Valet AT120. Also fits DC500 and DC800 Dirt Canisters. Dust retention of 98.4% efficiency*at DIN44956. If additional filtration is required, use HPB2H Hepa style bag is a great option.
When flat, bag measures 10” x 25 1/2”.
Can be purchased in 3 pack, 30 pack and 60 pack. Replace at no more than ½ full or when lack of suction is noticed.
Industrial Upholstery Tool – Orange
This tool is great for car interiors, seats and mats. May use for wet or dry pickup. It's a great addition to any garage vacuum kit.
*For use with a 1.25" domestic hose and the hose in the garage vac, you will need an adapter (HC-111BL) hose end which connects the tool to the hose.*
Electrostatic Lint Screen (S1200/S2000) (Optional for P125P/P110)
The ES-934 electrostatic lint screen is an optional replacement screen for single canister units such as the S-1200 and S-2000. It can also be used on models P-125 and P-110. Great for homes with pets that shed as hair and lint accumulates in this area of the unit. It adds protection and traps dirt in lint screen so it doesn’t build up on top screen. Makes cleaning upper chamber of unit much easier. The pull tab makes it easy to remove.
10" Diameter x .5" to .75" thickness
Dusting Brush – Premium
Plastic Bags for 14″ Dirt Can – Pkg of 4
Hose to Inlet Connector or Hose to HC111BL Cuff Connector
Combination Floor Brush
Flexible Crevice Tool
Wall Hanger Bracket with Grommets
1-1/4″ Plastic Round Door Wall Inlet – Pin Jack – 791500
Electrostatic Lint Screen – 14″
Blue fiber screen filter for added protection. Traps dirt in filter screen rather than allowing it to build up on the top screen of the dirt canister. Can be washed and reused 3-4 times.
Great for specialty debris such as hair, powder, etc. For VacuMaid units with DC1240 including P350P, S3600, S3600T. 14" Diameter x .5" to .75" thickness.
Hose to Hose Connector Both Ends Threaded
Crevice Tool – Premium
Notched Floor and Rug Tool
Plastic Deluxe Hose Hanger – 50′ Hose
Crevice Tool
