Hepa Bag – Pkg of 3
Five layer, 7 gallon HEPA style replacement bag for current VacuMaid models SR52, SR52H, SR760, SR800, all VacuMaid Garage Vacs and Valet ATQ300. This paper bag filter is an alternate bag for the AstroVac models: SR36C, SR36, SR50, SR52. Replacement for the following models: H-1P, P70, SR36, SR38, P80, H2, P73, P75, MK-IP, MK-XXIIIBP. Replace at no more than ½ full or when lack of suction is noticed. Can also be used in DC500 and DC800 dirt canister. When flat, bag measures 27" x 12".
Electrostatic Lint Screen 12″
The electrostatic screen is an optional item for the filter screen area. The ES1200 is a 12" blue filter with center hole. It allows free, unrestricted airflow that you have come to expect from your VacuMaid system. For VacuMaid units P350P, S2600, S1600 that have separate dirt canister DC-1200 or DCMCC.
12" Diamater x .5" to .75" Thickness
Wall Wand Holder
The Wall Wand Holder is for storing your wands on the wall instead of on the floor. It is very simple to use. Just pull rubber piece out so that it is flat and then press wand into it. The holder will automatically adjust itself to the diameter of the wand it is holding. It is strong enough to hold the wand with a powerbrush attached. Mounts using only one stud and two screws.
Plastic Bags for 12″ Dirt Can – Pkg of 4
Replacement can liner for 12” dirt canisters that have Air Channel. This bag is a replacement for 12” dirt canisters with Air Channel and makes emptying the canister much simpler. It works in the 12" DC1200 dirt canister of the following brands VacuMaid®, AstroVac®, Valet® and more. Fits the DC1200 dirt can in the following units: P225, S1600, S1660, S2600, and S2700. Fits the bottom can for single piece systems including: ATQ160, ATQ180, P110,
P112, P125P, S1200, S2000, SR12, SR14, SR40V, SR44, and SR46.
Use for easy maintenance when disposing of debris. Simply remove bottom can, take out can liner and throw away. No puffs of dust as you dump the can. Clean and simple.
When flat, bag measures 22" x 12". This bag can only be used if dirt canister has bag clip and air channel.
Industrial Upholstery Tool – Orange
This tool is great for car interiors, seats and mats. May use for wet or dry pickup. It's a great addition to any garage vacuum kit.
*For use with a 1.25" domestic hose and the hose in the garage vac, you will need an adapter (HC-111BL) hose end which connects the tool to the hose.*