Showing 649–684 of 733 results

1-1/4″ X 30′ Hose with HV109BL

$64.00
1-1/4″ x 30′ Straight suction hose with plastic cuff (HV109BL) and NO curved wand.  To take HV109BL hose cuff off,

1-1/4″ Metal Wall Inlet – Microswitch

$20.99
Standard Metal inlet valve for central vacuum systems. Microswitch (1 pin) - Turns the vacuum system on automatically when the hose end is inserted into the inlet valve.

1-1/4″ Metal Wall Inlet Square – Pin Jack

$28.50
•Cast metal construction •Pin-jack style valve •More durable than plastic valves •Durable enough for commercial use, but designed for use

Bottom Can with Air Channel for 12″ Dia. Unit – 16″ Tall

$99.00
Replacement bottom can with latches and air channel for 12″ diameter units.  It is 16″ tall.  The air channel allows for the

Spot Inlet Valve Kit

$96.00
Spot Inlet Valve Kit, 15' Hose, Dust Brush

New Hide A Hose Valve Trim Kit HS5000 series

$204.00
The Valve Trim Kit includes: inlet valve, finish door, low-voltage switch, 4 screws, 2 wire nuts. New features include smaller size, improved rubber door seal, improved hose-locking system, simple on/off switch, adjusts to wall thicknesses up to 1 ½ inches (3.8 cm). Available in white or almond. Refer to HS5000 installation guide for valve trim instructions.    

1-1/4″ Plastic Wall Inlet Square – Pin Jack 5592

$6.10$6.30
PinJack (2 pin) style allows you to control the on/off of the vacuum from the switch on the hose handle.

3″ x 3″ x 2″ 90 degree TY + PF226

$18.50
For 3″ plastic fittings, PF226 adaptors are included for each 2″ bell.

12″ Diameter Dirt Canister

$319.95
12" steel primary cyclonic separator to be used with single motor power units. The patented air channel allows you to use PB4M can liners in the bottom and the FSF12 safety screen can be used under the lid.

1-3/8″ Slim Fit Handle Style 4 Wire, 6′ Pigtail Cord

$179.58
The "slim fit" style handle has 360 degree rotation to minimize kinks, effort, and in-hand weight. 4-wire hose has high/low votage on/off that controls the electric brush and vacuum. Can be used with standard pin-jack valves.

Vacuum Hose Connector – One End Threaded

$3.25
This black hose cuff fits 1.25″ (32mm) ends. It is used to thread on to the end of a hose

Commercial 1-1/2″ Metal Wall Inlet – Microswitch

$31.80
Commercial style 1-1/2″ Stainless Inlet w/ Microswitch.  Opening is 1 3/8″. 1-pin Microswitch turns on the system when the hose

Lid for DC1200, Paper Bag models, and Garage Vacs

$16.00
Replacement lid for 12″ I.D. diameter cans with lift off lids. Includes DC1200, Garage Vacs, SR36, SR36, SR52. Diameter of

Safety Screen

$10.50$12.50
New Poly-Fiber Screen for 12" Disposable Bag Units.  This safety screen eliminates the bothersome build up of material on the small metal motor intake screen.  The Poly-Fiber Screen is designed to fit right into the bottom of the canister, on top of the pierced metal plate.  

Valet Intercom V3SW Mini Room Station

$219.95
The Valet V3SW serves as an individual Master Station. The VPS3DC Transformer and the VSPC Transformer Cord are required for every eight stations (see related items). Valet’s innovative, multi-functional thinking gives home communication an extra dimension. System One by Valet not only provides communication, but it can extend your stereo system, operate air-conditioning, pool filters, and garage & lighting operations. It can even enable you to make those important far-reaching family announcements, such as “Dinner’s Ready”. Small, sleek design. Approx. 6.75” x 5”

1 1/4″ Plastic Super Valve Full Door w/ Reversible Flange

$21.75$22.25
The easy to install supervalve with reversible flange makes your installation decisions easy! • Left or right handed installation. • Larger electrical access for easy wiring • Allows the 90˚ elbow to rotate through full 180˚

2″ Plastic Slide Gate Valve w/ Two PF226

Comes with two PF226 2″ adapters to fit with 2″ central vacuum pipe. If you are using Schedule 40 pipe,

1-1/2″ Stainless Inlet Locking

$36.44$47.70
Commercial Inlet valve for 1 1/2" hose. Will not work with a standard residential vac hose.

1-1/4″ X 10′ Hose with HV109BL & HC111BL Cuffs

$29.50
1-1/4" X 10' Hose with HV109BL & HC111BL Cuffs Easily connect to the clipper attachment.

VacuSweep Dust Pan

$37.86
The VacuSweep® Sweep Inlet Valve makes it easy for debris and dirt to be
quickly swept and removed from non-carpeted surfaces.
For use in kitchens, mudrooms, workshops, hair salons, retail stores, any
sweepable area in either a residential or commercial environment, the
VacuSweep® Sweep Inlet Valve will clearly satisfy all your needs.

1-1/4″ Plastic Round Door Wall Inlet – Pin Jack – 791500

$3.09
PinJack (2 pin) style allows you to control the on/off of the vacuum from the switch on the hose handle.

Commercial 1-1/2″ Metal Wall Inlet – Microswitch

$31.80
Commercial style 1-1/2″ Stainless Inlet w/ Microswitch.  Opening is 1 3/8″. 1-pin Microswitch turns on the system when the hose

Wire Hose 2″ ID For Connection To 2″ Tubing

$5.40
Good option for installing a vacpan or vacusweep.  Also used to connect ICC211 or ICC210. Use a clamp HC28 to

Lid for DC1200, Paper Bag models, and Garage Vacs

$16.00
Replacement lid for 12″ I.D. diameter cans with lift off lids. Includes DC1200, Garage Vacs, SR36, SR36, SR52. Diameter of

Valet Intercom V3SW Mini Room Station

$219.95
The Valet V3SW serves as an individual Master Station. The VPS3DC Transformer and the VSPC Transformer Cord are required for every eight stations (see related items). Valet’s innovative, multi-functional thinking gives home communication an extra dimension. System One by Valet not only provides communication, but it can extend your stereo system, operate air-conditioning, pool filters, and garage & lighting operations. It can even enable you to make those important far-reaching family announcements, such as “Dinner’s Ready”. Small, sleek design. Approx. 6.75” x 5”

1 1/4″ Plastic Super Valve Full Door w/ Reversible Flange

$21.75
The easy to install supervalve with reversible flange makes your installation decisions easy! • Left or right handed installation. • Larger electrical access for easy wiring • Allows the 90˚ elbow to rotate through full 180˚

2″ Plastic Slide Gate Valve w/ Two PF226

$40.80
Comes with two PF226 2″ adapters to fit with 2″ central vacuum pipe. If you are using Schedule 40 pipe,

1-1/2″ Stainless Inlet Locking

$36.44
Commercial Inlet valve for 1 1/2" hose. Will not work with a standard residential vac hose.

14″ diameter Dirt Canister

$479.95
14” steel construction canister is a primary separator with cyclonic separation. It is to be used with two motor power units.The patented air channel allows you to use the convenient PB14M can liners. The FSF14 safety screen can be used under the lid of this model.

Trim Plate 5589

Trim plate for plastic electravalves, supervalves or standard plastic inlet valves.

Plastic Trim Plate – 5588

$1.25$1.29
ES Style Square Plastic Trim Plate - 775588

Wire Hose 2″ ID For Connection To 2″ Tubing

$5.40
Good option for installing a vacpan or vacusweep.  Also used to connect ICC211 or ICC210. Use a clamp HC28 to