Showing 109–144 of 733 results

Standard Tool Kit

$79.95
Great kit for hard surfaces such as tile, concrete, wood, etc. Will work with Hide A Hose handle for your Hide a Hose system or you will need a curved wand and standard hose to use with standard inlet valves.

Hose Sock and Tie Ends – Gray

$50.00
The HS-30TG is a soft cloth hose cover that easily fits over your central vacuum hose.

Foam Filter (DC1100 / DCMC)

$25.00
Replacement Foam Filters for DC1100 3 required

TurboCat Tool Kit

$279.95$355.95
"The ATK-500 tool kit includes a Turbocat air turbine brush.

Motor Brush – MB 117572

$17.25
Replacement Motor Brush for MB 117572 - 12

Premium Electric Kit – Pigtail Cord Hose

$485.95$499.95
The single solution for traditional and high density carpets. This kit features the Response electric brush with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density carpets.

90 Degree Flanged Ell with PF244A – White

$7.75
90 Degree Flanged Elbow with PF-244A • Can fit into a 2” wall Use behind 1 1/4" WS629 series Stainless inlet valves. Also used with metal back up plate.

Wire Hose 2″ ID For Connection To 2″ Tubing

$5.40
Good option for installing a vacpan or vacusweep.  Also used to connect ICC211 or ICC210. Use a clamp HC28 to

1-1/4″ X 5′ Hose with HV109BL and HC111BL

$16.26
1-1/4" X 5' Hose with HV109BL and HC111BL Cuffs. Perfect leader hose from garage vac to the cox hose reel. Easily connect existing 30 or 50 foot garage vac hose to the cox vacuum reel with one additional HC111BL cuff.

Bag Inlet Fitting

$3.00
Bag to Inlet Fitting on AstroVac and VacuMaid Paper Bag Models

Standard Tool Kit

$69.95
Great kit for hard surfaces such as tile, concrete, wood, etc. Will work with Hide A Hose handle for your Hide a Hose system or you will need a curved wand and standard hose to use with standard inlet valves.

Vac Pan

$50.00
The Original VacPan Sweep Inlet installs under the cabinets or into the wall. It is great for high traffic areas like the kitchen or bathrooms. Clean with the ease of a broom plus you have all the benefits of a central vacuum.

New Hide A Hose Valve Trim Kit HS5000 series

$204.00
The Valve Trim Kit includes: inlet valve, finish door, low-voltage switch, 4 screws, 2 wire nuts. New features include smaller size, improved rubber door seal, improved hose-locking system, simple on/off switch, adjusts to wall thicknesses up to 1 ½ inches (3.8 cm). Available in white or almond. Refer to HS5000 installation guide for valve trim instructions.    

30′ Garage Kit

$125.00
Included Items: 1-1/4” Hose (30’) Hose Hanger 3. Dusting Brush Upholstery Tool 5. Crevice Tool Telescopic Wand Floor Brush Tool

Mesh Caddy Bag

$9.00
The caddie bag can be used to hold your accessory tools. It is designed to hang on your hose hanger and makes transportation of the tools to where you need them easy and convenient. The CB-180 is the easiest way to store your tools.

1-3/8″ X 30′ Hose with HV125BL and W338R

$93.50
1-3/8″ x 30′ straight suction hose with ring cuff (HV125BL) and metal curved wand (W338R).  To put (HV125BL) or (W338R)

Floor Brush 15″ – 1.25″ Neck

$83.50

1.25" Sidewinder 15" Hard Floor Tool w/Horsehair

Inverted Bag with Weight for 14″ Can

$67.00
The inverted bag is a replacement for the following AstroVac units: SR54, SR60, SR64.

Curved Swivel Wand – 1-3/8″ Hose

$15.25
This wand serves as part of the connection between accessory tools, floor brush and hose.

Premium Electric Kit – Direct Connect Hose

$479.95$499.95
The single solution for traditional and high density carpets. This kit features the Response electric brush with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density carpets.

Hose to Inlet Connector – 1-3/8″ to 1-1/4″ – Ring Type

$4.00
The HV-125 cuff is a Hose to Inlet Connector with a metal ring. This metal ring makes it suitable for use with pin jack valves. This cuff converts 1-3/8" hoses to work with 1-1/4" pin jack valves.

Lamb Electric Motor 117795 120V 5.7″ 2 Stage

$142.00
The MB117795 was used in the following models: S1600, P110 since July 2004.

1 Utility Valve Kit

$30.00
VacuMaid Utility Vac increases the versatility of your Utility Vac with a single inlet utility valve kit. The Utility Kit includes 1 plastic utility valves, 2 each 2" vacuums tubing reducer schedule 40, and one 90 degree Sharp radius street elbow. PVC tubing and low voltage wire not included.

50′ Car Care Kit

$125.00
Commercial Tool kit with 50 foot hose

2″ Tubing 5′ Long, Straight on Both Ends – White – Box of 25 Pieces

$112.30
2″ Tubing 5′ Long, Straight on Both Ends – White – Box of 25 Pieces

VacuMaid UV100 Extended Life Professional Wall Mounted Utility Vacuum with 50 ft. Car Kit

$529.00$549.00
The VacuMaid Utility Vac allows user to plug directly into the unit or add additional vacuum inlets for large workshops or spaces. This unit is powered by a 6.6" Tangential By Pass motor with 1500 hours of motor life. 120 volt, 12.7 amps. Sturdy galvannealed steel construction. Multi layer two-inlet opening HEPA filter bag. DB rating with vented exhaust: 58.

Lamb Electric Motor 117073 120V 5.7″ 2 Stage

$115.00
The MB 117073 was used in the following models: S1200, P110 after July 2003. P215, P280, SR42, SR82

Vibrating Upholstery Tool – Black

$19.15
This upholstery tool uses rubber baffles to gently loosen embedded dirt from the surface being cleaned. This vibration caused by the rubber loosens the particles caught in the upholstery and vacuums them away. This is a great tool to extract dust from furniture, mattresses, pillows. It provides a deep down clean.

Belt – PB480

$6.96
Turbocat Air Driven Central Vacuum Power Nozzle belt. HP Turbocat belt number 7227. Fits all Turbocat and TP210 models. Will