Showing all 9 results

Commercial 5 HP, 3-Phase-230V (Includes Control Box, DC1400, DC500 & DRV330)

$8,714.00
Commercial 5 HP, 3-Phase-230V (Includes Control Box, DC1400, DC500 & DRV330)

Commercial 10 HP, 3-Phase-230V (Inlcudes Control Box, DC2530, DC1603 & DRV330)

$14,093.00
The vacuum producer is a ten horsepower, regenerative pump and the system includes electrical control box, suction relief valve, primary cyclonic dirt separation canister and secondary fine particle filter canister. 3-4 users with up to 80 inlet valves. Max pipe run of 400 ft. Movie Theaters, Office buildings, Movie theaters, Hotels, etc The 10hp power pump can be used for general cleaning by multiple users at the same time. This commercial systems can be used in a variety of applications including; office buildings, hotels, and more. The CR1525 comes with a primary and secondary filter.  The DC2530 is the primary filter and the DC1603 is the secondary filter.  *Includes 10hp pump, dirt cans, control box and relief valve. Typical VacuMaid Systems include a number of outlets in the facility to be cleaned at a ratio of one inlet for every 700 square foot of floor space.  Using standard 30 ft. hoses, valves are placed approximately 46 feet apart.  The Power Unit is located some distance away from the area cleaned and provides quiet, powerful suction to remove dirt and debris from the area cleaned.

Commercial 5 HP, Single Phase-230V (Inlcudes Control Box, DC1400, DC500 & DRV330)

$9,152.00
The 5hp pump with the CR1461 provides a much longer life than our standard residential systems. This is what makes them better for places that clean more often. This system can be used in a wide variety of applications for general cleaning and for auto body sanding.  It only allows for a single user to clean at a time. This unit allows for much larger dirt capacity. The primary filter has a capacity of 24 gallons and the secondary filter has a capacity of 27 quarts. Please call to purchase 1-800-221-1862. Technical assistance and planning support provided.

Commercial 10 HP, 3-Phase-230V (Includes Control Box, DC2600, DC1603 & DRV330) 12-15 users sanding fine dust

$13,412.00
The 10hp power pump can be used with the DC2600 for vacuuming up fine dust in an auto body shop.  This dirt can not be used for general cleaning.  Multiple users can use the vacuum at the same time.  The CR1526 comes with a primary and secondary filter.  The DC2600 is the primary filter and the DC1603 is the secondary filter.  For more information about obtaining a commercial central vacuum system please email us at lindsay@fullnet.net.   We assist in planning and designing these systems. Please call to purchase 1-800-221-1862. Technical assistance and planning support provided.

Commercial 5 HP, 3-Phase-230V (Inlcudes Control Box, DC1240, DC500 & DRV330)

$7,180.00
The CR1450 series 5hp power pump with the DC1240 provides a much longer life than our standard residential systems. This is what makes them better for places that clean more often. This system can be used in a wide variety of applications for general cleaning.  It only allows for a single user to clean at a time.   The DC1240 primary filter and DC500 secondary filter come with the CR1450 series.  The dirt capacity is 38 quarts in the DC1240 and 27 quarts in the DC500. If you need a larger capacity for a single user system, we would recommend the CR1460 series. CR1400 Series Instruction Manual Please call to purchase 1-800-221-1862. Technical assistance and planning support provided.

Commercial 5 HP, Single Phase – 230V (Includes Control Box, DC1240, DC500 & DRV330)

$7,517.00
The series induction motor power units are designed to be used in semi commercial and commercial applications. These units are equipped with transformers, relays, and enclosed 24v low voltage remote control panel that acts as a motor starter. These make ideal units for dental operations, restaurants, small hotel, and apartment complexes, nursing homes, service stations, and other small businesses. The 1400 series consists of three major components, the power unit, which is an induction motor directly connected to a regenerative blower, and the primary dirt separator and secondary dirt collector. The voltage and motor type will depend on the needs of the specific application for which it is installed.